Super Circuits DMR22-3 Series, Руководство пользователя, Страница: 48 / 70

48
To test and verify PTZ settings:
1.
Enter the PTZ Configuration menu, shown in Figure 42 by going to Main Menu > System Configuration > PTZ
Configuration.
2.
Select the
On Camera Settings
tab. This will open up the On Camera Settings menu, shown in Figure 40.
Figure 40. PTZ Configuration Menu > On Camera Settings Menu
3.
Select the camera to test in the camera drop down menu.
4.
Using the Directional buttons and other PTZ control buttons (Zoom In/Out, Focus In/Out, Iris In/Out), test the
functionality of the PTZ camera. If PTZ camera and protocol supports it, you may also click the Auto-Scan button
to test its function. PTZ controls buttons are shown in Figure 41.
Figure 41. PTZ Controls Button
5.
If PTZ camera is not working properly, make sure PTZ is connected and configured with the correct settings
under the
Serial Settings
tab.
6.
Click Done to exit and return to the previous menu.