LED Landscape Spotlight
Important: Read all instructions prior to installation.
User Manual
LED Landscape Spotlight
SPL-xKxW-60BR
User Manual
Rev Date: V0.1 11/21/2018
Rev Date: V0.1 11/21/2018
Troubleshooting
SPL-xKxW-60BR
* For superbrightleds.com technical help call 866-590-3533 or use our online chat service.
Problem
Possible Cause
Probable Solution
Fixture does not light
1. There is no power to 12 V power
supply.
2. Wire connection loose.
3. Primary landscape wire is not
connected to 12 V power supply or
wire has a disconnection.
4. Minimum load requirement not
met.
1. Check the outlet to 12 V power supply and ensure that a breaker
or GFCI circuit has not been tripped.
2. Check wiring to ensure it is securely connected.
3. Check primary landscape wire connection to 12 V power supply.
Next, follow wires from fixture to 12 V power supply to ensure
continuous run and/or follow wires between problematic fixture
and nearest working fixture.
4. Consult power supply specifications/manual and make certain
minimum load requirement is met.
Light flickers
(one fixture)
1. There is a loose connection to
primary landscape wire.
1. Check wire connections.
Light flickers
(multiple fixtures)
1. There is a loose connection to
12 V power supply.
2. Minimum load requirement not
met.
1. Disconnect power to power supply. Check primary landscape
wire for loose connections or possible short.
2. Consult power supply specifications/manual and make certain
minimum load requirement is met.
Light is dim
1. Maximum load of 12 V power
supply has been exceeded.
2. Recommended run length of
the landscape wire has been
exceeded.
1. Check for other lights or load on same system and/or increase
12 V power supply wattage.
2. Increase primary landscape wire gauge size.
WEATHERPROOF
65
IP
