Super B NOMIA 12V210AH, Руководство пользователя

Страница: 14 / 34

14
Figure 3. Installing the Li-ion battery using the Super B mounting brackets
4.3.2. Placement and removal of a fuse
Before the Li-ion battery can be used, the internal fuse needs to be installed. The 32V/500A
fuse is supplied with the Li-ion battery.
Use the following steps to (re)place the fuse in the Li-ion battery (see figure 4):
1. Disconnect the negative wire from the - pole of the Li-ion battery (see paragraph 4.5. for the details).
2. Disconnect the positive wire from the + pole of the Li-ion battery.
3. Unscrew the fuse cover using the TORX key.
4. Unscrew the fuse contacts using a 13mm wrench.
! Warning! Short circuit danger! Avoid making a short circuit with the wrench
5. Place the (new) fuse between the contacts, place washers and spring washers and tighten the fuse
contact points to 13Nm.
6. Fasten the fuse cover.
7. Proceed to paragraph 4.5 to read the instructions on installing the Li-ion battery in an electrical circuit.