13
OPERATING THE BIKE
3. ENGAGE THE THROTTLE / PEDAL ASSIST
a.
For throttle displays only (USA): The battery indicator lights
will come on, indicating the bike is on and ready. Throttle is now
live. Proceed with care on a flat surface as bike will move forward.
b.
For pedal assist displays only (Europe).
Press on the + button once to get to the first level of pedal assist.
One bar will turn blue. Press a second time to reach the second
level, and a third time to reach the third level.
4. POWER-OFF
First turn off the power to the bike by pressing
the power button on the handlebar display (a),
then the power switch (b) on the side of the seat
that connects to the battery.
Once the seat button is pressed to the off
(flush) position, the light ring will remain lit for 60
seconds before turning off completely.
If the power switch on the side of the seat is not
turned off, the system remains active and the
battery will continue consuming power.
2. POWER-ON THE DISPLAY
Dis-engage the kickstand. Do not sit on bike with kickstand
engaged. Make sure the battery button is on. Seat yourself on the
Super73.
a.
On displays with a throttle:
Activate power by pressing on the power button on the throttle
mount for a few seconds.
b.
On displays without a throttle for pedal assist bikes,
press the lower power button for a few seconds.
There are a total of 5 LEDs that indicate the battery level in Red.
When the PAS is adjusted, however, the same LEDs turn blue to
indicate the Pedal Assist (PA)S level.
1. TURN ON THE BATTERY
To turn the power on, press the push button and the light will
come on. The button will stay pressed in. For information on how
to charge the battery, go to Battery section.
(a)
(b)
