Supco VLTS, Руководство по эксплуатации, Страница: 6 / 44

Temperature recorder and printer
4
F
EATURES
Table 1: Temperature Recorder and Printer – Features describes the VLTS features
with reference to the section and page in this manual that describes how to use the feature or set it.
Table 1: Temperature Recorder and Printer – Features
Page Chapter, for more information Feature
18 “ Setting Sensor Types ” Various sensor types can be connected
21 “ Setting Alarm Limits to Sensor ” Alarm and delay range settings for each sensor
26 “ Changing the Sampling Rate ” Change sample rate, from 30 seconds to 120 min.
10
“ Displaying Measurement Values ” Display of measured values, daily min/max values
24
“ Setting Printing Time and Daily
Min/Max Reset ”
Auto print daily min/max value report
24
“ Setting Printing Time and Daily
Min/Max Reset ”
Setting daily print and reset to min/max Values
11
“ Automatic Continuous Real-Time
Printing ”
Activate/deactivate automatic continuous printing
12
“ Style of Automatic Continuous
Real-Time Printing ”
Select a printing style from 4 options: graphic, small
text, large text or table
22
“ Setting up Additional Alarm
Events ”
Turn on/off internal buzzer in alarm events
11 “ Printing ” Print reports and print device settings.
20
8
“ Alarm Settings ”
“ Other Connection Options ”
External Alarm Contact Port 1A.
22
“ Setting up Additional Alarm
Events ”
Alerts for low battery and printer out of paper
20
“ Renaming Channels for Sensor
Identification ”
Assign name for each sensor/channel.
25
“ Renaming the Device for
Identification ”
Assign name for each unit, vehicle/place number and
company name.
14 “ Copying data to external memory ” Copy data to SD-card/ USB memory stick
24
“ Setting Temperature Scale and
Date Format ”
Change temperature units to Celsius or Fahrenheit;
Change date format to European or U.S.
9 “ Power Sources ” 10-30V operating voltage, 9V backup battery
9
“ Installing and Replacing the
Batteries ”
Up to 48-hour backup battery for reading & storage