Supco VLTS, Руководство по эксплуатации, Страница: 27 / 44

Temperature recorder and printer
25
5. Two lines will be displayed: Change date and time. Use / to change the flashing
number in, for example, 15/06/2022 14:51:00 and press to confirm.
* Assuming, in this example, that a European date format was previously selected.
6. Set Clock and Date will be displayed again. Use / to scroll through the menu or
press twice to save the changes and exit the settings menu. Please wait, Saving
Setting will be displayed, and then, several seconds later, the readings screen will revert.
Settings saved will also be printed.
C
HANGING THE
P
ASSWORD
To change the password for accessing the settings menu in a VLTS device, do the following:
1.
Press / until the Settings Submenu is displayed.
2. Press to enter the settings menu, Enter password: will be displayed.
3. Enter a password, (4 keys in a row). If you have not yet changed your password, use the
default password: , , , .
4. Scroll with / . Find the Change Password menu and press .
5. Enter old password: will be displayed. Enter the old password. Repeat the 4-character old
password. Each entry of character will display another *.
6. Confirm new password: will be displayed. Repeat the new 4-character password. If the
second string is not identical to the string entered previously, Wrong password will be
displayed, and the new password must be reentered. If the second string is identical to the
first,
Change Password will be displayed.
7. Use / to scroll through the menu or press twice to save the changes and exit
the settings menu. Please wait, Saving Setting will be displayed, and then, several
seconds later, the readings screen will revert. Settings saved will also be printed.
Note: each of the six keys may be used to enter a password, and one key may be used more
than once. Make a record of the new password and secure it in a safe place for future reference.
R
ENAMING THE
D
EVICE FOR
I
DENTIFICATION
Each VLTS unit may be assigned 3 names: unit name, vehicle or site (Veh/obj name), and a
company name.
 Unit name – name of the device
 Veh/obj name – the vehicle number or the installation sit .
 Company name – the name of the company
Each of these names may consist of up to 13 characters in letters and digits. Table 4 displays the
characters that may be used.
For
“ Renaming Channels for Sensor Identification ” , see page 20.
To rename the device, vehicle or site and the company, do the following:
1. Press / until the Settings Submenu is displayed.
2. Press to enter the settings menu, Enter password: will be displayed.
3. Enter a password, (4 keys in a row). If you have not yet changed your password,
use the default password: , , , .
4. Scroll with / and find the Set Unit, Veh/Obj and Company name . Press .
5. Set: Unit name will be displayed. Use / to select which of the three options to
rename and press to confirm.
6. The name you chose to change will be displayed, for example, Enter unit name:
Instrument1 , and the cursor will flash after the last character in the name.
▲
Backspace - to delete the last character, press .
▲
To change the last character in the name, use /