Notice d'utilisation voile
| SORA2
SUPAIR
| SORA2
| page 10
Pre-Flight Preparation
Separate A,B,C and D risers and brake line make sure that the risers and lines do not have any knots or twists and are not catching anything
(stones, twigs, etc).
Lay out the glider in half-circle on its upper surface. The opening on the leading edge must face upwards.
Check that both trims are in a symmetrical position.
Caution !
It is crucial to carry out a thorough pre-flight check and in particular to ensure that the passenger and pilot are correctly fastened in
their harnesses and that the harnesses are correctly connected to the spreaders.
Before every take-off, check the following :
-
that harnesses and karabiners are in good working order
-
that the reserve parachute container is correctly closed and that the handle is in the correct position
-
that your personal settings have not been changed
-
that the glider is correctly connected to the karabiners and that they are safely locked
