Harness User’s manual
S
UP’AIR
_
RADICAL3
Page
17
Installing the reserve parachute
1.
- Open the 7mm square
Maillon Rapide®
- Connect the reserve para-
chute single riser loop
- Push the maillon through
the plastic ring
- Twist
3.
- Give a second twist to
the plastic ring
- Push the buckle through
the maillon
2.
- Push the end riser
through the toric ring
- Push the maillon through
the risers buckles
4.
- If you use separate/in-
dependente risers Repeat
steps 1 through 3 with the
second riser
- If you use separate risers
5.
-
Tidy up the assembly
- Be certain for the risers end
loops to be securely fas-
tened
- Close the Maillon Rapide®
tightly by hand
- Tighten using pliers and
making a
¼
turn
One (1) square 7mm Maillon Rapide® will be two (2) flexible toric rings.
>> Installing the front mounted reserve parachute
For the following procedure :
- Connect the reserve parachute handle to the POD.
- Pack your reserve parachute inside your reserve parachute container.
- Connect the reserve container to the harness.
Carefully and exactly follow the installation procedure provided and recommended by the front mounted reserve parachute container manufacturer.
WARNING !
If you have a front mounted
reserve parachute setup, be
sure to guide the speed-bar
line between the risers and
the harness, not to hinder
the rescue parachute’s
extraction/deployment
sequence.
Check the completed installation during
a hang-test.
Have the installation checked by a professional outfit.
Conduct an extraction test every six ( 6 ) months to assure proper system functionality.
Note : conducting and extraction test does not imply deploying the reserve para-
chute which will stay inside its POD.
>> Riser reserve parachute connection
