SUPAIR EVO XC3, Руководство пользователя

Страница: 34 / 38

SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S UP’AIR_ E VO XC 3 Page34
User’s manual EVO XC3
Maintenance
Cleaning and harness maintenance.
It is a good idea to wash your harness from time to time. We recommend using a mild solvent (such as soap) with a soft brush.
Rinse thoroughly.
DO NOT use chemicals agents such as aggressive detergents or strong solvents potentially harmful to the webbing stitching, and
harness fabrics.
Product longevity.
The threads making the webbing and fabrics used in the EVO XC3 have been selected to offer the best possible light weight to
longevity ratio. Nonetheless, in some conditions, after long term exposure to UV and/or significant abrasion or exposure to che-
micals, it is compulsory to have your harness’s integrity checked at a certified repair centre. Your safety depends on it.
Zippers should be lubricated from time to time using a silicon spray only.
These carabiners must never be used for anything else than paragliding (not for climbing, towing etc.).
Storage and transport.
When not using your harness, store it inside your paragliding rucksack in a dry cool and clean place protected from UV exposure.
If your harness is wet, please dry it thoroughly before storing.
During transport protect the harness from any mechanical or UV deterioration (use a bag). Please avoid long transports in wet
or humid conditions.
Independently from the pre-flight checks you must open and unfold your rescue parachute once every 6 months.
A full compulsory maintenance harness check must be conducted every two years :
• Carbon fiber seat plate : no cracks or splinters.
• webbings (no wear tear or material unraveling - no unwanted folds).
• The buckles and self-locking carabiners (no hairline cracks, apparent damage, and functioning properly).