User manual
| EVASION BUMP
SUPAIR
| EVASION BUMP
| page 11
8
9
10
Upon setup completion, conduct an extraction sequence
during a hang-test to verify that all works properly before
duplicating the installation procedure again...
Push the yellow cable through the loop and gently
pull the cord out.
Push the cord through the left loop.
Push the loop through the lower flap grom-
met.
Push the Loop through the upper grommet
flap grommet and push the yellow cable
through it ( loop ).
The yellow cable locks the reserve parachute pocket
flaps in place. Tuck the upper flap inside its lower
stretchable pocket. Check before every fligth for the
yellow cable to be properly inserted through the two
loops keeping the reserve parachute pocket securely
Position the handle in its folding sleeve. It
may not protrude from the harness.
Handle positioning in it holding sleeve.
