Glider user's manual
| EONA 3
SUPAIR
| EONA 3| page 10
Pre-flight preparation
Unfold the glider and place it on its upper surface in an arc.
Separate the A,B,C risers and the brakes, be certain for the risers and lines not to have any twists or knots or be hooked to a branch,
stone etc...
The EONA 3 glider was designed to help new pilots with their progression. To discover your new wing, we will advise you to conduct
your first
small flights in calm conditions on a school training hill or a familiar site you are used to flying with your own harness.
Caution !
It is crucial to carry out a thorough pre-flight check and in particular to ensure that the passenger and pilot are correctly
fastened in their harnesses and that the harnesses are correctly connected to the spreaders.
Before every take-off, check the following :
-
that harnesses and karabiners are in good working order
-
that the reserve parachute container is correctly closed and that the handle is in the correct position
-
that your personal settings have not been changed
-
that the glider is correctly connected to the karabiners and that they are safely locked