13
F
C F
I
F
C
F
D
E
F
A
G
B
C
D
F
E
A
D
E
D
C
B
B
C
B
C
C
G
1
2
3
4
5
6
7
8
Placing the parachute in the rescue parachute pocket
Thanks for reading carefully ! We recommend
the initial rescue parachute installation is made
by a qualified person.
When the assembly is complete,
perform a test pull of the handle to
ensure the compatibility and the
correct deployment of the rescue
(pod + handle). Then reassemble as
previously done.
1. Put the rescue parachute inside the
harness‘ pocket. Place the stretch
flaps D and E outside. The rescue
handle must be placed upwards.
Place the parachute risers inside the
sheath (the risers should be placed
under the parachute).
2. Pass a braided rope through the
upper elastic cord.
3. With the braided rope, pass the
elastic cord F through the under
stretch flap E grommet. Pass the
stretch upper flap D under the under
stretch flap E.
4.Still with the braided rope, pass the
upper elastic cord F inside the under
flap C grommet. Pull away gently the
braided rope in order to prevent any
damage on the elastic cord.
5. With the braided rope, pass the
right tip of the cable inside the elastic
cord.
6. Hide the right tip of the handle in the spe-
cially designed housing on the under flap C.
7. Pass the braided rope through the under
elastic cord G and then pass successively the
elastic cord through : the stretch upper flap D
grommet the under flap C left grommet the up-
per flap B grommet. Pass then the left tip of the
cable inside the elastic cord.
8. Hide the handle left tip in the specially de-
signed housing on the under flap C. Then hide
the under flap C right tip under the Speedbag.
Finally hide the under flap upper tip under the
upper flap B.
Parachute folded ac-
cording to state of the
art technique, in its pod
and connected to the
handle
Upper flap
A
B
C
G
D
F
E
Under flap
Upper stretch flap
Under stretch flap
Upper elastic cord
Under elastic cord
the handle must be connected
on central loop of the pod.
