www.sunwire.ca
8
Conference Calling (continued)
To initiate a conference call during a call:
1. When the phone is on call screen, tap the “Conference” button.
Enter the third-party number or choose an available number on the
left menu from call history or contacts.
2. After the call is established, the conference screen is brought up.
3. Tap on the [+] icon to add another member to the conference.
Parking a Call
Inbound calls can be parked (put on a public hold) by way of a custom
soft-key or by dialling: ##. Parking a call allows you or another user to
pick up the call from any other device on the phone system.
While on a call, you may find a ‘Park’ soft-key. If your phone is not
equipped with a ‘Park’ softkey, simply press ##. This will place the call in
the next available parking lot. The system will read back the parking lot
number once the call is parked.
The call will then leave your phone and you can hang up the receiver.
You could now advise the person who must answer the parked call
that they have a call parked on “XX” (where XX represents the parking
lot number where the call was parked).
Configuring pre-specified soft-keys for that parking lot will allow any
user to pick up a call in that parking lot. Alternately, users can simply
dial the parking lot number in order to pickup the parked call.
Note: If your phone is configured with pre-specified softkeys for
parking lots, the status light next to the softkey will light up if a call is
parked in that parking lot number.
