4
SH1685FAL
Instruction Manual
Installation:
4.
Put the main body up-side-down (Fig. A). Slide Deco. Board onto Base Bracket. Then slide Base and Washer onto Base
Bracket respectively.
5.
Fix Washer, Base and Base Bracket with Screw M6*20.
6.
Stand the unit correct (Fig. B). Fix L Bracket onto Alum. Fixtures with Screw M8*8 & M4*8 Respectively. Then slide L Bracket
into the holes of Control Box.
7.
Fix L Bracket onto Control Box with Screw M6*16.
Operations:
5.
Plug in the unit to a socket. Make sure the power supply is same as rated.
6.
Press LED Lighting Switch to switch on or off the LED lighting.
7.
Press Heater Switch. IR Sensor LED starts to flash. When people or other objects are inside the sensing area (within about
0.6M around the heater body), IR Sensor Indicator LED lights up, and the heating element is switched on automatically.
When people or other objects leave the sensing area, the heating element is switched off after 5 seconds. IR Sensor LED
starts to flash again.
8.
Note
: IR sensing distance may differ from different material and colour. If there’re some mirrored material around the unit, i.e.
glass mirror, stainless steel mirror, aluminium mirror, etc, the sensing distance may extend to 3.5m.
9.
Cautions:
19.
The unit must be placed with the clearance of 150cm at least to the wall.
20.
The unit must be securely placed on a horizontal and flat surface.
21.
The unit is at high temperature during operation. It keeps hot for a period after shut down. Potential danger would occur when
touching it during this period.
22.
Don't place the unit close to curtain and/or other flammable objects. Ohterwise there will be a danger of catching fire.
No.
Part Name
No.
Part Name
1
Screw M6*20
7
Alum. Fixture
2 Washer
8 L
Bracket
3 Base
9 Screw
M8*6
4
Base Cover
10
Screw M4*6
5
Base Bracket
11
Control Box
6
Deco. Board
12
Screw M6*16