44
LEAKAGE TEST
Gas connections on the appliance are leak tested at the factory prior to shipment. Possible
mishandling of the appliance during the shipment might contribute to product integrity as a
whole. A complete gas leakage test must be performed again at the installation site. Please
follow the procedure below for leakage test.
-
Make a soap solution of one part liquid detergent and one part water. The soap solution
can be applied with spray bottle, brush or rag. Soap bubbles will appear where a leak
is present.
-
Mak
e sure the control tap is in the “OFF” position (full disk = ●) on the control panel.
-
Turn on the gas supply and check for bubbles from the hoses and connections.
Presents of bubble means that a leak path is present.
-
If a leak is present, turn OFF the gas supply immediately, tighten any leaking fitting
carefully, turn gas again and recheck.
-
Never leak test while smoking.
