Quick Start
Pair
*
Link
Disconnect
Operation
WIRELESS
WIRED
Press and hold for 2 sec
Plug in via USB
Unplug
Press and hold for 1 sec
Option 1 - Force Sleep: press and hold Home button for 5 sec.
Option 2 - Auto Sleep: leave the controller without operation in 5 min.
Option 3 - Passive Sleep: Disconnect from the connected device side.
1
Including Linux and Raspberry Pi.
2
Starting with iOS 13, iPadOS 13, tvOS 13. No requirements on Mac OS.
3
Currently unavailable for TV.
4
Switch Pro Controller mode only.
Platform Compatibility
2
1
3
4
USB Type C
Motion Control
Wireless
Wired
Keymapping Profiles
Pair & Link
Pair
refers to the first time sync with the device.
If wirelessly paired with another device thereafter,
the stored info of the 1st device will be erased,
new pairing has to be done when back to the 1st
device.
Link
refers to the reconnection to an ever paired
device, whose device info has been stored in the
controller automatically.
Pair methods listed here are the typical to each platform.
Read the following guides for more options.
Fire devices may support all the 4 pairing methods.
Charge the battery
Charge via type C USB cable on DC power supplies (output Voltage 5V, current ≥ 250mA),
including but not limited to:
•
AC adapter
•
Switch dock
• USB port of
computer
•
others with USB electricity output, like power bank, etc.
The controller supports playing during charging. The 4 LED lights stay lit once full charged.
WARNING: Battery Safety
Do not connect to high voltage outlets.
Use only approved charger and cord.
Periodical charging is necessary when unused for long.
Remove the battery if they are worn out and dispose of properly.
ABXY caps are removable for reposition.
Nintendo Switch Layout
Xbox Layout
