3
4
CAMERA INSTALLATION
Power Negative
Power Positive
“+”
1. Use the supplied screws to fix the camera to the vehicle.
2. Connect the camera power cable to the vehicle power system (lights etc).
90°
90°
Before rotating the camera, loosen the fixing screw on the
side of the camera, hold the camera with one hand, rotate
it up or down, and tighten the screw after reaching the
best angle.
Light Sensor
IR
‘Light’
The light sensor underneath the camera lens
detects light changes and will automatically
turn on the IR ‘Lights’ at night, or in low light
conditions, so that the image is clearer
(B&W image).
IR ‘Lights’ (Night Vision)
Plug & Play
Notice:
3. Connect the power cable to the monitor & insert the
cigarette lighter power adapter into the vehicle’s
adapter’s socket. Switch the monitor on and then
adjust the camera angle to the ideal viewing position,
then fix it by tightening the bracket screws.
Cigarette lighter slot in car
1) The dashboard mount is already attached
to the monitor and can be stuck to the dash
board. Choose and clean a suitable location
on the dashboard, remove the paper from the
monitor stand sticky pad and firmly press the
stand mount onto the dashboard.
2) If using the windscreen mount, please
replace the dashboard mount by utilising
the supplied screwdriver.
1. The monitor can be fixed to the dashboard, windscreen,
or air-vent.
2. How to install the mounts:
Used for reversing assistance
For in-vehicle monitoring
03.
MONITOR INSTALLATION
Dashboard Mount
Air Vent Mount
Windscreen Mount
Содержание DZ43
Страница 1: ...DZ43 Digital Wireless Camera System 1...
