Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 91
3.9.12 TRACERT Test
Figure 3-107 Tracert Test Interface
See Figure 3-107 for the Tracert test interface. A Tracert test can be initiated from the gateway on
a designated IP address to check the routing status between them. The table below explains the
configuration items shown in the above figure.
Item
Description
Source IP Address
Source IP address where the Tracert test is initiated.
Destination Address
Destination IP address on which the Tracert test is executed.
Maximum Jumps
Maximum number of jumps between the gateway and the destination address
which are returned by the Tracert test. Range of value: 1~255.
Info
The information returned during the Tracert test, helping you to learn the detailed
information about the jumps between the gateway and the destination address.
After configuration, click
Start
to execute the Tracert test; click
End
to terminate it immediately.
