Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 60
Authentication Password
Batch Step Size
Sets the increase or decrease step size of the authentication password in the batch
setting.
Authentication Username
Batch Rule
The rule for batch setting the authentication username, including
Increase
and
Decrease
two options.
Authentication Username
Batch Step Size
Sets the increase or decrease step size of the authentication username in the batch
setting.
After configuration, click
Save
to save the settings into the gateway, or click
Cancel
to cancel the
settings.
3.6.3 Port Group
Figure 3-63 Port Group Setting Interface
See Figure 3-63 for the Port Group Settings interface. By default, there is no available port group
on the gateway. A port group is a set containing one or more than one port, having such properties
as
Port Selection
and
Authentication Mode
the same for all the ports in it. A new port group can
be added by the
Add New
button on the bottom right corner of the above list. See Figure 3-64 for
the port group adding interface. Note that a port which has been occupied by one port group
cannot be chosen by others.
