Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 40
Figure 3-37 Add Ringing Scheme Interface
The table below explains the items shown in the above figure.
Item
Description
Duration at ON
The duration of the tone at ON state, with the default value of 1000ms.
Duration at OFF
The duration of the tone at OFF state, with the default value of 4000ms.
CallerID
After this setting, different ringing schemes will be executed on the FXS port
according to the set CallerID.
After configuration, click
Save
to save the above settings into the gateway or click
Close
to cancel
the settings. See Figure 3-38 for the saved ringing scheme.
Figure 3-38 Ringing Scheme List
Click
Modify
in Figure 3-38 to modify the ringing scheme. See Figure 3-39 for the Ringing
Scheme Modification interface. The configuration items on this interface are the same as those on
the
Add New Ringing Scheme
interface.
