As soon as the code transmitting finishes, the logo will
light up. If the learning process succeeds, ONE beep
sound will be heard.
OR
Once the learning fails, TWO beeps will be heard, and
the logo will not light up. Please follow the steps (3) &
(4) again to repeat the learning process until succeed
(ONE beep sound is heard).
(5)
If you find the specified key has learned an
unexpected code, what you need to do is just to
learn the correct code into the key again. The new
code will replace the previous code automatically.
(6)
Please follow the steps (2) ~ (5) until all device keys
have learned the codes form the original remotes.
(7)
Press
for 3 sec. for exiting the “Learn Mode”
after learning process finishes.
3.
Beep Function
(1)
Beep on: Press for 3 sec. and hear ONE beep sound. (Beep-on is factory default)
(2)
Beep off: Press for 3 sec. and hear TWO beeps sound.
Noted:
During learning process, beep on function will be automatically activated to indicate the learning
status, even under “Beep off” mode. Beep off function will automatically recover after exiting “Learn mode”.
(Refer to No. 2 in Setup section)
4.
Others
(1)
Battery low:
When battery low occurs, “Logo” will blink every 7 sec. and you won’t be able to enter the “Learn” mode
under the status. Please change the new batteries.
(2)
Power saving:
SRC-600 will enter Power saving mode when it idles for 12 sec. and enter Sleep mode when it idles for 120
sec.
(3)
Key protection:
When the key(s) is pressed for more then 30 sec, SRC-600 will stop working and enter “Protected” mode
automatically, the Logo LED and Device LED will light off; while the backlight of the keys will light up.
Operation will be recovered by pressing any key.
