16
5-3 CHARGING PROCEDURE
Remove Short Plug on Operation Box and connect
Charger's Plug to Charging Receptacle.
NOTE:
The plug has a correct orientation. Match the
orientation using the thick pin as a guide and
insert it.
When charging is complete (during operation),
connect Short Plug to Charging Receptacle.
Short Plug
Charging Receptacle
ChargerÊs Plug
Thin
Thick
-1 If Battery Pack is not to be removed from
STAIR CHAIR, connect Charger's Plug to
Charging Receptacle positioned at the side of
Operation Box.
-2 If Battery Pack is removed, connect Charger's
Plug to Battery Pack's Receptacle.
1
-
1
1
-
2
Charging
Receptacle
Battery Pack
CAUTION
Pull out Short Plug or Charger’s Plug holding
the plug itself, after unscrewing the threaded
part of the plug.
The coupling or decoupling of a plug by
force or by holding the cable may result in
the damage of the receptacle or in cable
disconnection.
100-240V AC outlet
Charger
Battery Pack
Alternatively, charging can be done directly to a
dismounted Battery Pack.
