ENG-13
c)
Press
to display the VOICE setting and choose off and Press
.
4.1.14
Set Interval
This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will not
react to the motion of human (or animals). The minimum interval is 5 seconds, it means
the PIR works all the time and media is taken almost continuously. The maximum
interval is 30 minutes; it means the PIR will be disabled for 30 minutes after each
triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval Time as 1 minute provided that
previous option is 5 seconds.
a)
Press
to display the setting menu.
b)
Press
to select Interval.
c)
Press
to enter in to the interval setting.
d)
Press
to select 1 minute.
e)
Press
to save the current setting, and then press
to return to
info display.
4.1.15
Set Timer
This parameter defines a certain time lapse in a day when The Camera can be triggered.
In the rest of the time the device is shut off. The effective value of the hour ranges from
0 to 23 while the minute ranges from 0 to 59.
Provided that the camera should work from eight a.m. to five p.m., the steps are as
follows:
a)
Press
to display the setting menu.
b)
Press
to select Timer.
c)
Press
to select item, press UP or DOWN to change the value until the
start time changes to 8 and the stop time changes to 17.
d)
Press
to save all current setting.
4.1.16
Enter Password
If the password setting is selected as On, after switching on the camera, the LCD screen
on camera will prompt to enter password. The default password is off. It can be changed
where the steps are as following:
a)
Press
to display the setting menu.
Содержание HC-300A
Страница 1: ...ENG 1 User Manual HC 300A ...
Страница 8: ...ENG 8 4 1 1Photo Setting 4 1 2Video Setting ...
