7
6) Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 750W).
The default setting is HI.
7) To calibrate temperature setting, hold down the TEMP button for (5) seconds to switch to
thermostat calibration status. The LED display will begin to flash. The default setting on
the display is 00. The
0
F or
0
C LED light will illuminate. Press HI/LOW/UP or
0
C/
0
F/DOWN
button to scroll up and down for the correct calibration. The displayed temperature should
match your wall or free-standing thermometer within (2) degrees. Once the desired
temperature is set, press TEMP again to save your settings. (Note: To set back to factory
settings, hold down the TIMER button for (5) seconds. This will set all values back to
default.)
8) The SunTech Portable Heater can be turned off by pressing the POWER button. DO NOT
TURN OFF THE
MASTER POWER
SWITCH ON THE REAR OF THE HEATER OR
UNPLUG THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is left on using
the TIMER function, there will be (5) second sound alert to let you know that the time is
expiring. If no actions are taken, the heater will shut off.
Recommendations for Maximum Performance
1. The SunTech Portable Heater can heat a space up to 1000 square feet. Be sure not to
place the heater in an area where the air flow or air movement is great.
From Fahrenheit to
Celsius
From HI to LOW
