SunTech ST4340LC, Быстрый старт

Страница: 1 / 7

SU-P-015-RevA, 1/5/2021
Page
1
of
7
ST4340LC Quick Start Guide
Connect, Configure and Assemble
Figure 1: ST4340LC
1. Scope:
Initial steps to quickly connect the ST4340LC to a PC, configure Network Parameter settings using SyncTrak and
assemble for use. For detailed specifications and programming information please see the links below or
contact Suntech Support at support@suntechus.com.
2. Related Suntech Documentation:
a. Suntech ST4340LC Documentation
b.
ST4000 Series SIM Card Information
c. ST4000 Series-LED Activity and Diagnostic Guide
d. SyncTrak User Manual
3. Required Resources:
a. HW: Suntech ST4340LC, 6 assembly screws, USB to Micro-USB cable
b. HW: 12v DC power supply
c. HW: SIM card: Activated, Access Point Name (APN) for carrier/network
d. HW: PH#1 or PH#2 Screwdriver (Torque Driver recommended)
e. HW: PC Computer: Windows 10 recommended
f. SW: Suntech MediaTek (MTK) USB drivers: v1.1032.3 or newer, available at support@suntechus.com
g. SW: Suntech SyncTrak: v5.0.6.5 or newer, available at support@suntechus.com
4. Connect the ST4340LC to a PC
a. Remove the ST4340LC lid to access the SIM card holder, Micro-USB and backup battery connectors, see
Figure 2.