2
Press and then press , key board is unlocked
，
and screen resume to main
interface
Remarks: Press <Exit> to come back to the main screen.
3. Clock
1
）
Set Up Time
Press , then press or , and select”time setting” then press to enter
in”time setting”;
Press or to select”Current time”, press to enter in”current time”;
Press or set up”Year”, press to confirm;
Press or set up”Month”, press to confirm;
Press or set up”Day”, press to confirm;
Press or set up”Minute”, press to confirm;
Press or set up”Second”, press to confirm.
Remarks: Press <Exit> to come back to the main screen.
2
）
Auto On/Off
Set up clock to turn on/off counting device
Press ,then press or ,and select
“
time setting
”
，
press to enter in “time
setting”;
Press or ,and select “Timer setting”, Press to confirm
；
Press or to set “Power On Timer”, press to confirm
；
Press or to set “Power off Timer”, press to confirm
。
Remarks: Press <Exit> to come back to the main screen.
4. System Setting
1
）
Battery Saving Mode
Press , then press or ,select “system setting”, press to confirm
．
Press or ,select “battery saving mode”, press to confirm
．
Press or ,select “on/off”, press to confirm
．
Remarks: Press <Exit> to come back to the main screen.
2
）
Sensitivity Setting
（
Detection distance and accuracy
）
Press ,then press or
，
select “system setting”, press to confirm;
Press or , select “Sensitivity Setting”, press to confirm;
Press or ,select “high
／
medium
／
low”, press to confirm.
Remarks:
Suggested to select high sensitivity for high volume to raise power sensitivity
Suggested to select low sensitivity for low volume to extend battery life
The red LED on receiver flashes, when transmitter is placed away from
receiver far than accurate distance. It is suggested to move both part closer to
solve this problem.
Language Setting
Low-cost people counter
