Website: www.sunsynk.com E-mail: [email protected]
11
4. PRODUCT INSTALLATION
4.1. Select installation location
When you receive the inverter and prepare to install it, please select a suitable location, which should
consider the below factors:
Ventilation - You must ensure the air ventilation of the installation location. Improper installation may
cause overheating, affect the working efficiency and lifespan.
Sun-shade - Exposing the inverter to sunshine will cause overheating and affect the working
efficiency.
Avoid rain and snow - Even if the inverter has IP65 protection. We still recommend installing the
inverter at the ventilated place where we can avoid rain and snow. It can help extend the lifespan of
the inverter.
Figure 5 - Recommended installation place.
Please select the wall with a certain bearing capacity.
When installing the inverter, the vertical slope cannot exceed +/-15°, making sure no lateral tilt.
Otherwise, it will affect the function of the heat sink and the output power will be lower than expected.
If installing more than one inverter, you must leave at least a 500mm gap between each inverter.
Each inverter must be at least 500mm above and below. And must install the inverter at the place
where children cannot touch.
Consider if the installation environment is helpful to see the inverter LCD display and indicator status
clearly.
You must offer a ventilated environment if inverter installed in the airtight house.
