Website: www.sunsynk.com E-mail: [email protected]
5
ELECTRICAL CHARACTERISTICS
INPUT
Maximum Recommended PV Power
50W
Maximum Input Voltage
DC21V
OUTPUT
Maximum Constant Power
150W
Maximum Output Power
200W at 50/60Hz
Rated Voltage
AC230V
Operating Voltage Range
9.6 to 12.6 Volts Nominal
Operating Frequency Range
50Hz or 60Hz
Total Harmonic Distortion
MSW
Efficiency
90% / Peak Efficiency 75%
5. SAFETY
Make sure the Pocket Power Station 2 is fully charged prior to use.
Use suitable cables when charging your device from the Pocket Power Station.
When charging the Pocket Power Station, it is recommended that you use the provided
Sunsynk TM connectors.
The Status LED Array indicates a low battery. In order to avoid shortening battery life, ensure
the device is fully charged so that all three lights are illuminated.
During periods of storage, the Pocket Power Station should be charged at least once every
two months to avoid battery life decay.
Keep the Pocket Power Station 2 away from fire and avoid temperatures above 140°F (60°C)
when not in use.
Do not get the Pocket Power Station 2 wet or immerse it in water.
Do not wash the Pocket Power Station 2 with a corrosive cleaner.
Do not puncture or fracture the Pocket Power Station 2 so as to avoid electric shock or
electrolyte leakage from the lithium-ion battery(s).
Do not attempt to disassemble, modify, or fix the Pocket Power Station 2.
Do not use a damaged cable or power charger for the Pocket Power Station 2.
Please re-cycle this device at an appointed disposal location for lithium-ion batteries
6. TROUBLESHOOTING
Inside and charged fully so that all LEDs are illuminated, the battery must be firmly locked into
the recess so that it cannot fall out.
In the event that too many appliances have been plugged into the Pocket Power Station 2, it
will cut out. In this case, switch off the device and remove the batteries. Then immediately
replace the batteries and switch the device back on. This is, in fact, a reboot of the device’s
software.
