WARNING:
Read all safety notices and instructions. Failure to comply with safety notices and instructions may
result in electric shock, fire and/or serious injury.
Keep all safety notices and instructions for future reference.
Resistance
The maximum temperature of the pumped liquid should not 35 in continuous oper
℃
-
ation.
Avoid pumping aggressive liquids (of acids, alkalis, silo leachate, etc.) and liquids with abras-
ive (rubbing-off) substances (e.g. sand).
Electrical connection
The electrical connection is made to an earthed socket 230 V ~ 50 Hz. Fuse protection at least
6 A.
The motor is protected against overloading or blocking by the built-in thermal motor protection.
In case of overheating, the overheating protection of the motor automatically switches off the
pump and after cooling down, the pump switches on again automatically.
Mains connection
The pond pump you have purchased is already equipped with a protective contact plug. The pump is
intended for connection to a 230 V~50 Hz earthed socket. Make sure that the socket is sufficiently
fused (min. 6 A) and in perfect condition. Insert the pump plug into the socket; the pump is then ready
for operation.
Notice:
Installation
Please position the pump under water and ensure that no water can get into the socket.
Features
New and clear design with variable frequency technology, low power consumption, high flow rate,
large capacity, good noise insulation, can be used in water and on land.
The ceramic shaft is wear-resistant, rust-proof and durable.
Suitable for fresh and salt water as it contains no copper
All components can be disassembled for easy cleaning.
With stepped hose nozzle, suitable for connecting hoses with different diameters.
Rotor blockage protection with immediate power cut-off in case of pump impeller blockage.
© by WilTec Wildanger Technik GmbH
Item 51634-51645
Page 4
05 2021
-1
