Connect the power supply of the controller.
Controller operation instructions
1. On/off
Plug in the device and touch
to switch the pump on and off.
If the device is not operated for a long time, please unplug it.
2. Flow rate adjusting
Press
or
to adjust the flow rate; the device disposes of 10 levels, and
the display screen will show “SP01”–“SP10.” For detailed information please
refer to the parameter list:
3.Feeding mode
Press
for 3 s to enter the time delay start mode, and the screen will show “FD10.” The device will
start to work after 10 min. Again press
for 3 s to quit the feeding mode.
4. LOCK function
Long press
to lock the keys, and the screen will show “LOC.” Long press
to unlock the keys.
5. Automatic memory function
When the controller powers off accidentally, the device will save the last working condition automatic-
ally, and will return to these conditions after the device will have been re-powered on. Thus the set-
tings will be saved when there is a power failure e. g.
© by WilTec Wildanger Technik GmbH
Item 55550
Page 4
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1
Model (item №)
Voltage
Level
Power (W)
Flow rate (ℓ/h)
Head (m)
CET-26000
(55550)
220–
240 V/
50 Hz
1
80
13000
2.8
2
100
14000
3.4
3
130
15500
4.0
4
160
17000
4.5
5
200
18000
5.1
6
240
19000
5.8
7
285
20500
6.5
8
335
22000
7.2
9
380
23500
7.8
10
450
26000
8.5
