Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Security notes
ATTENTION:
In stagnant waters, garden ponds and swimming ponds and the surrounding areas the device can only
be used with a residual current circuit breaker and a triggering nominal current up to 30 mA (according
VDE 0100 part 702 and 738).
The device is not for use in swimming pools, any kind of paddle ponds and the like that are used by
humans during the operation of the device. Operating the device during the stay of humans in the
danger zone is not permitted. Ask your electrician!
The device must not be used by persons (including children) with reduced physical, sensory or mental
capabilities and/or lack of experience or knowledge, unless they are instructed by a person respons-
ible for their safety or given instruction how to use the device.
ATTENTION:
Perform a visual inspection before each use of the device. Do not use the device if the safety
equipment is damaged or worn. Never override the safety equipment.
Only use the device for the purpose as specified in this manual.
You are held responsible for the safety in the work area.
If the power cord or the plug is damaged by external influences, the cord must not be repaired!
The cord must be replaced with a new one. This operation must be carried out only by a quali-
fied electrician.
The voltage of 230 V AC volts as indicated on the device nameplate has to be according to
the mains voltage.
Never lift, transport or fix the device by using the power cord as a means for this purpose.
Make sure that the electrical connectors are located in a flood-safe area and that they are pro-
tected from moisture.
Pull the power plug before working on the device.
The device must not be exposed to a direct stream of water or rain.
As for the compliance with local safety and installation regulations the user is held responsible
(as the case may be, ask an electrician).
Consequential damage due to flooding caused by faults of the device is to be prevented by
the user who takes the appropriate measures therefor.
In case of a failure, the device may only be repaired by a qualified electrician or by the WilTec
customer service.
The device must never run dry or be operated with the suction tube fully closed.
The device must not be used for the operation of swimming pools.
The device must not be installed in the portable water cycle.
© by WilTec Wildanger Technik GmbH
Item 50286–50297
Page 3
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1
