SunSun COP-10000, Инструкция по эксплуатации

Страница: 4 / 7

© by WilTec Wildanger Technik GmbH Item 55562 Page 4
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Assembly
1. Insert one end of the holding rope included into the hole at the edge of the buoy (from two or
three different diagonal directions).
2. Attach the other end of the rope to the holding peg.
3. To fix the product, firmly put the holding peg into the muddy edge zone of the water body.
Note! When fixing, make sure that the motor is fully immerged in the water; otherwise, it might be dam-
aged.
Cleaning and maintenance
Regularly clean the pump for to allow it to keep its efficiency.
1. Hold the main part of the water pump with one hand, turning the buoy counter-clockwise with
the other hand to detach the main part of the water pump from the buoy (Fig. 1).
2. Turn the mounting frame counter-clockwise and remove it (Fig. 2).
3. Slide the latch downwards (Fig. 3).
4. Turn the upper cover lid to detach it from the lower cover lid of the main part (Fig. 4 and 5).
5. Unscrew the adjusting screw to remove the rotor unit (Fig. 6 and 7).
6. To clean the individual parts, use a soft brush and clean them under running water.
7. Re-mount the individual parts of the product after cleaning.