background image

Introduction

Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our cli-

ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.

Keep these operation instructions safe.

This wave maker pump provides a natural simulation of waves like in the ocean and the imitation of
natural whirls and thus offers fish and other organisms living in the water a species-appropriate envir-
onment.
Before using this product, read the following instructions for use carefully and keep them.

Safety instructions

ATTENTION

:

The use of the device is only permitted with a residual current circuit breaker with a triggering rated
current of up to 30 mA (according to VDE 0100 parts 702 and 738).

This device is not intended to be used by persons (including children) with limited physical, sensorial
or mental capabilities or lack of experience and/or knowledge, unless they are supervised or have
been instructed by a person responsible for their safety on how to use the device.

Children should be supervised to ensure that they do not play with the device.

ATTENTION

:

Perform a visual inspection of the device before each use. Do not use the device if safety
devices are damaged or worn. Never suspend safety devices.

Only use the device in accordance with the intended use specified in these operating instruc-
tions.

You are responsible for the safety in the work area.

If the cable or plug is damaged due to external influences, it must not be repaired! It must be
exchanged for a new one. This work may only be carried out by a qualified electrician.

The voltage of 230 volts alternating voltage indicated on the nameplate of the device must cor-
respond to the existing voltage.

The device must never be lifted, transported or attached by the power cord.

Make sure that the electrical plug connections are protected from flood and moisture.

Pull the power plug before working on the device.

Avoid exposing the device to direct water jets or rain.

The operator is responsible for compliance with location-specific safety and installation regula-
tions. (Ask an electrician if you have questions concerning these regulations.)

If the device fails, repairs may only be carried out by a qualified electrician.

Read all safety warnings and instructions. If you do not follow the safety and other instruc-
tions, you risk electric shock, fire and/or serious injury.

Keep all safety information and instructions for the future.

© by WilTec Wildanger Technik GmbH 

Artikel 51656–51659

Seite 3 

http://www.WilTec.de
http://www.aoyue.eu

 

11 2020

-1

http://www.teichtip.de

Содержание 51656












Отзывы: