Sunstone Power Industrial GmbH
PT. Solid Power Energi Indonesia
Sunstone Power Industry Co., Ltd.
Nobelring 13, 60598 Frankfurt (M) Germany
Komplek Duta Indah Iconic, Blok. C No. 2 Jl.
1803A, Tiley Central Plaza. Shenzhen, China
www.sunstonepower.de
MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 Indonesia
www.sunstonepower.com
2.4.2 Battery pack interface functions
(1) The positive and negative terminals of the battery pack
The red terminal is the positive electrode of the battery, and the black terminal is the negative elec-
trode of the battery. Use M8 screws to lock it tightly. When installing, use SC25-8 copper nose to
connect external equipment for energy supply or charging.
(2) Screen display
The screen shows a total of 4 interfaces:
1. Current voltage value;
2. Current current value;
3. Current SOC;
4. Fault code (not displayed when there is no fault).
The meaning of the letters displayed on the screen: U stands for voltage, A stands for current
(charge and discharge current), and C stands for current power.
For example: 12U is 12V voltage; 50A is 50A current; 70C is 70% of current power.
When the screen 4 displays the fault code, the user can check the cause of the fault through the
following table.
2.4.1 Battery pack interface definitions
Function
Charge and discharge positive terminal
Charge and discharge negative terminal
Battery pack information and status display
Battery pack status guidelines
Battery pack on/off and status switch
External 5V output
Interface
Positive electrode
Negative electrode
Screen display
Indicator light
Switch
USB
Remark
-
-
-
Dual
Support continuous 100A
single pin overcharge
Support continuous 100A
single pin overcharge
NO.
1
2
3
4
5
6
