Form #43219020
June 08
12
following diagram. Attach the side panels as shown. Attach the end panels so that the end flanges of the end panels overlap
the side panels. Attach the side panels and end panels together with the screws provided in the kit. Attach the remaining
screws as shown in Detail A. This is to ensure that the Parabolic Reflector Extension is securely attached to the reflector. The
clearances to combustibles (shown on the clearance label that is secured to the reflector on the control end of the heater and
in Section 5 of these instructions) must be closely observed.
Please order the Parabolic Reflector Extension Kit using the Part
Numbers below:
Model No.
Parabolic Reflector
Extension Kit Number
SG3, SG4
#43822010
SG6, SG8
#43822020
SG10, SG12
#43822030
SG13, SG14, SG15
#43822040
14)
OPTIONAL PROTECTIVE REVERB SCREEN
The optional protective Reverb Screen acts as a safety net in the
unlikely event that the ceramic tile assembly is broken by an outside
force. In addition, it increases the overall emissivity of the radiating
surface with a blackbody radiation effect. It is recommended in
high-traffic areas as well as where improved radiant output is
desired.
Please order the Protective Reverb Screen using the Part
Numbers listed to the right:
15)
REPLACING PARTS
At all times when parts are being replaced, ensure that both the gas and electrical supplies are disconnected. Various parts
are available from the factory for replacement by a licensed service person. Refer to the exploded parts guide in Section 16
for all replacement parts.
16)
INSTALLATION DATA
Date of
Installation:
Number of
Heaters in System:
Heater Serial Number:
Heater Model:
SG
N = Natural Gas
L = Propane Gas
17)
REPLACEMENT PARTS GUIDE
ITEM#
PART #
DESCRIPTION
ITEM#
PART #
DESCRIPTION
1
30333040 Valve VR8205A-2081 @ 10” W.C. – Propane Gas
17
43908010
Frame Assembly
(1 Burner Unit)
2
30333050 Valve VR8205A-2123 @ 6” W.C. – Natural Gas
18
43908020 Frame Assembly
(2 Burner Unit)
3
30279000 Transformer AT120B1051
19
43908030 Frame Assembly
(3 Burner Unit)
4
30632030 Spark Module, Fenwal #35605-950-0150
20
43908040 Frame Assembly
(4 Burner Unit)
Model No.
Reverb Screen
Kit Number
SG3, SG4
#43876010
SG6, SG8
#43876020
SG10, SG12
#43876030
SG13, SG14, SG15
#43876040
