SunStar SGL35-L7, Инструкции по сборке, установке и эксплуатации

Страница: 18 / 45

Form 44201440 17
Oct 2018
The hanging brackets are supplied as an optional accessory item. Below are the kit contents.
Item No. Part No. Description
44560350
Quantity
44560351
Quantity
44560353
Quantity
1 02140040 HHCS,1/4-20 x 1/2" SS 6 6 6
2 02129100 WASHER, FLAT 1/4"N SS 6 6 6
3 02167019 LOCKNUT, 1/4-20 KEPS - SS 6 6 6
4 44560250 HANGER BRACKET – RECEIVER 2 2
5 44560260 SLIDER ARM – LH 1
6 44560270 SLIDER ARM – RH 1
7 44560289 SLIDER ARM – LH 1
8 44560299 SLIDER ARM – RH 1
9 44560809 FIXED ARM 2
The tables below can be used to select the correct bracket to ensure that the heater is installed at the correct
clearance to combustible distance from the ceiling depending on whether the heater is installed indoors or outdoors,
the mounting angle and whether a heat shield is installed.
15- 22” Bracket (With heat shield)
telescope hole positions*
22- 30” Bracket (Without heat shield)
telescope hole positions*
Mounting Angle INDOOR OUTDOOR INDOOR OUTDOOR
0 1 to 5 1 to 5 3 to 5 1 to 5
15 and 30 2 to 5 1 to 5 3 to 5 1 to 5
45 and 60 4 or 5 2 to 5 4 or 5 2 to 5
* The above table relates to the holes positions as shown in the figure below for the two different length adjustable
brackets.