SunStar KM-818, Руководство пользователя

Страница: 12 / 22

4) Lubrication
Befor the operating of the machine like
[Fig-4], operator has to put into red-
marked oiliy hole the lubricction.
5) Adjustment of Belt Tension
After installing the motor ③, as check nuts, ① of ②
is loosen, the belt ④ will be given the tension by the
weight of the motor. Fasten the check nut ① firstly and
then adjust the tension.
[Refer to Fig. 5.]
6) Belt Cover
Caution：To avoid the risk of accidents, turn the power off
and wait until the motor to stop rotating before
installing the belt cover.
(1) Attach the belt cover guide ① to the 8 screw holes on
the arm.
(2) Insert 8 belt cover guide screws by half of their bodies
into the cover guide only.
(3) Insert the belt covers ③,④,⑤ and rear. Screw
up in the hole.
(4) Fasten the belt covers ③,④,⑤ and ⑥, with screws
⑦.
[Fig. 6]
[Fig. 7]
[Fig. 5]
12