SunStar KM-341BL, Руководство пользователя

Страница: 4 / 22

4
11
Machine Safety Rules
Safety instructions in this manual are defined as Danger, Warning and Caution.
If they are not properly observed, physical injuries or machine damage might occur.
: This mark must be observed. Otherwise, danger could result during machine installation, transportation and
operation.
: When this mark is observed, machine-related injuries could be prevented.
: When this mark is observed, machine errors could be prevented. Caution
Warning
Danger
1-1) Transportation
Danger
1-2) Installation
Warning
1-3) Repair
Caution
Those, who fully understand the safety rules, should transport the sewing machine. The
following instructions must be observed during transportation:
ⓐ At least two people should move the machine.
ⓑ To prevent accidents from occurring during transportation, wipe off the oil put on the
surface of the machine.
The machine may not work properly or break down depending on where it is installed. The
right place of installation should meet the following conditions:
ⓐ
Remove the package and wrappings from the top in order. Take a special notice of the
nails on the wooden box.
ⓑ
Dust and moisture stains and rusts the machine. Install air-conditioners and clean the
machine regularly.
ⓒ
Keep the machine away from direct sunlight.
ⓓ Leave the left, right and rear sides of the machine at least 50cm away from the wall to
secure sufficient space for repair.
ⓔ
Explosion
Do not use the machine in the atmospheres exposed to the danger of explosion. To avoid
explosion, do not operate this machine in a place where a large quantity of aerosol
products is used or where oxygen is stored, unless there are specific facilities installed to
prevent explosion.
ⓕ
The machine does not provide lightings. End users should install them at their
workplace.
[Note]See “4. Installation” for more details on machine installation.
When the machine needs to be repaired, only the designated A/S engineers, who were trained
by Sunstar, should repair the machine.
ⓐ
Before cleaning or repairing the machine, turn off the machine and wait for 4 minutes till
the machine is completely discharged.
ⓑ
The machine specifications and parts should not be altered without prior consultation with
Sunstar. This may pose danger to operation.
ⓒ
When repairing, only the original spare parts produced by Sunstar should be used for
replacement.
ⓓ
Put all safety covers back on the machine after repairing is complete.