manualshive.com logo in svg

SunStar KM-1170BLX, Руководство пользователя, Страница: 43 / 47

Поделиться
Скачать
SunStar KM-1170BLX Скачать руководство пользователя страница 43

43

8.11) Trimmer

8.11.1) Trimming Order

When the pedal is stepped backward during sewing, trimming is conducted. The following is the trimming order.
1) When a trimming signal is entered, as in Figure (A), the trimming roller lever 

①

is located at the lowest part

of the curved line of the trimmer cam. In this case, the moving blade 

④

is parted from the fixed blade 

③

as in

Figure (B) and conducts a rotary movement toward the opener after passing above the bobbin.

2) As in Figure (C), the trimmer cam conducts the rotary movement and the trimmer roller lever 

①

contacts the

cam. At this moment, the moving blade 

④

holds the lower and upper threads as in Figure (D), and performs

rotary movement toward the fixed blade 

③

.

3) When the trimmer roller lever 

①

and the trimmer cam

②

's hole 

⑤

are in a line as in Figure (E), the moving

blade 

④

trims the thread by contacting with the fixed blade 

③

as in Figure (F). 

[Fig. 8-17]

Trimmer Type-A

Trimmer Type-B

②

①

①

①

②

②

⑤

③

③

③

④

④

④

<A>

<B>

<C>

<E>

<F>

<E>

<F>

<D>

<C>

<D>

<A>

<B>

①

④

①

②

②

③

④

①

②
③

④

⑤

Содержание KM-1170BLX
















































Отзывы:

Нет отзывов