3
2. Add Remote Controller
This device supports maximum 50 remote controllers. Extra remote controllers have to be coded to
the host in order to perform normally. Their code cannot be empty or the same with the saved code
in the host.
Method: enter remote controller setting menu, press “4”or “6” to choose remote controller serial
number, press “8” to find “coding” and then press “ok” to confirm. Trigger the remote controller
you want to add. The panel will make two beeps after receiving it. And then press “ok” to confirm.
If the remote controller has been saved before, after triggering it, the main unit will make four
beeps and LCD screen display “Error, Repeated code”.
Operation figures:
Fig1: enter remote control menu Fig2: choose remote control serial Fig3: waiting to receive signal
number and coding menu
Fig4A: recognize successfully Fig4B: the host has the same code Fig5: press “ok” to save
with remote controller code
3. Delete Remote Controller
If the remote controller is lost or damaged, it should be deleted. After deletion, it cannot control the
main panel.
Method: enter remote controller setting menu, press “4” or “6” to choose the remote controller you
want to delete. Press “8” to find “delete”, and then press “ok”.
Operation figures:
Fig1: enter remote controller
Fig2: choose the controller you Fig3: press “ok” to confirm
setting
want to delete
