Shenzhen SUNSKY Technology Limited
21
then enter the second phase, H03 indicated the total turn-GPS time, which means the second
phase is 2 minutes (ie Hzz - Lyy). H can be set (3 ~ 99). When S is set as 0, then it out of
power-saving mode automatically and switches to the GPS always open model, that is
command 188 will not work. When the V520 received the order and confirmed the user
password was correct, it will configure the S / L / H items according to user-defined
parameters , after the success , then send confirmation: GPS AUTO MODE: (yy-zz) / xxx
Minutes.
Note:
1. Set S / L / H and other parameters, if the peak is 0, then we must write 0..
For example
: To turn off GPS 30 minutes is necessary to set the S030, but not the S30.
2, HZZ is the total time set to open GPS can not be less than Lyy.
3, parameters set by 199 for restart will not be lost, reset will not change until the reset.
4, only in the power-saving mode, the V520 can be set timer switch GPS in accordance with
199, the other two modes will not.
3.2.5 Single localization request instruction
Format:
666+ user password (4 figures)
eg:
6660000
Explanation
: When v 520 tracker receives the instruction and confirms the user password
correctly, reads the GPS information. No matter whether effective, the information with the
replying base station which is the set of the original software will be sent to the sender.
Data format:
Lat: Latitude Direction (+/-) Latitude Value (Accuracy for 5 after the decimal point)
Long: Longitude Direction (+/-) Longitude Value (Accuracy for 5 after the decimal point)
Speed: Speed KM/H (Accuracy for 2 after the decimal point)
Direction: Direction (Accuracy for 2 after the decimal point)
Date: Date YYYY-MM-DD
Time: Time HH
：
MM
：
SS (GMT)
