**
Pause recording: In the recording state, short press
【
REC
】
key to pause recording, recording time
flashes and pause Walking seconds, then short press the [REC] key to continue recording.
**
Stop / save the recording: In recording mode, short press
【 】
button to stop the recording and
save the recording file automatically.
*
o use external microphone recording, external microphone connected to the [input] jack to recording
*
If the battery is very low, the machine saves the current recording file automatically.
3
Recording voice settings: When select "Voice enabled”, in the recording process, the voice source
admitted less than the voice sensitivity settings will automatically pause the recording, the recording time
to stop walking seconds, when the admission of the sound back to the identification of the machine will
automatically continue recording, on or off both are available upon request.
"VOX" displayed on the screen represents the voice enabled.
etailed settings, please refer to the "System Settings" / "Voice Settings
4
Recording monitor settings
**
Enable / Disable:
When this feature is turned on, can monitor the sound with headphones in
recording.
Note:
in microphone (external microphone) recording, after the machine connected to
the headset, can not put the speaker of the headset too close to the microphone, the distance
should be kept more than 3cm (or turn off the monitor function), in order to avoid self-excited
screaming sound.
Detailed settings, please refer to the "System Settings" / "Monitor Settings
**
Monitor volume adjustment:
First set listener “listens enable”, in the recording state, short
press [+] / [-] button to adjust the size of the sound of the monitor.
5
Line recordings (Line) / telephone recording:
**
Connecting external audio devices: one end of the transcription line supplied by the company
insert into the machine [input] jack and the other end into the audio output jack of the
external device; telephone recording, insert telephone line into a special connector, then
use one end of the transcription line insert into the connector, the other end is inserted into
the machine [input
】
jack:
**
Select the recording source: before line recording, select" audio recording "recording mode in
System Settings "/" recording source ", recording icon is displayed as
“ ”.
