SMS access equipment position
Please send DW to the device to get the device location:
Such as: Cali - Valle del Cauca, Colombia
GOOGLE link address
Send GOOGLE to the device to get the device location link:
http://maps.google.com/maps/?f=q&hl=en&&q=3.43097,-76.53924&S=0&D=2012-5-23
12:00:00&D=0
Note: default as the international time, China time is the actual query time
plus 8 hours
Such as: the actual query time is 12:00:00, China time is 20:00:00
3、Vibration alarm
When terminal startup fortification, and in the terminal fortification comes into
force, the vehicle vibration happens many times, will trigger vibration alarm mechanism,
terminal would immediately start vibration alarm. Terminal will be to set binding mobile
phone number to send a vibration alarm message, and at the same time to the monitoring
platform upload vibration alarm information.
Vibration alarm message example
：“ Vehicle vibration alarm, please immediate
attention.
”
Tip：
To closed vibration alarm: hair message CF to equipment, success reply: close
security success
To open vibration alarm: SF send text messages to equipment, success reply:
open anti-theft monitoring
4、Oil electric control（
optional
）
When vehicle is stolen , you can send cut off oil command by monitoring platform , on the
condition of ensure vehicles safe running , cut off stolen vehicle ' oil , then the vehicle will
cannot continue to start ,
In order to guarantee the safety of vehicles, the terminal can executive oil electric operation
only when GPS in the effective position, and the vehicle speed is less than 20 km / h conditions or
when the vehicle is stationary . When the alarm is released, by monitoring platform Manual
issued recovery oil electric command, the terminal performs recovery oil electric motor, the
vehicle will can continue to run.
Disconnect the power source (oil) command : hair message DY000000 to
equipment,and receive a success reply later
Open power source (oil) command
: hair message TY000000 to equipment,and
receive a success reply later
( the initial password is 000000 )
