1
2
3
5
4
6
7
8
9
10
720P video without flashing:
Press ON/OFF for 2 seconds to turn on the DV. Blue light is on, this means the device is standby;
press once ON/OFF again, blue light gives 3 flashes and is off, this is 1280X720P video (synchronized
sound); no light during the video taking; 10-minute automatic segmentation and saving of continuous
video, cyclic covering; press once ON/OFF again to stop video taking and back to standby mode (blue
light is on).
1080P video without flashing:
Turn it on to enter standby mode (blue light is on); long-press ON/OFF for 3 seconds, red light is on
while blue light gives 3 flashes and is off, this is 1920X1080P (synchronized sound); no light during the
video taking; 5-minute automatic segmentation and saving of continuous video, cyclic covering; press
once ON/OFF again to stop video taking and back to standby mode (blue light is on).
Shoot at 12 mega pixels:
Turn it on to enter standby mode (blue light is on), press MODE once, blue light is on while red light
gives a flash, this means a picture of 12 mega pixels (4032X3024) has been shot and automatically
saved; then the device goes back to standby mode (blue light is on).
IR LED on/off:
IR LED on: In standby mode (blue light is on), long-press MODE for 3 seconds, blue light is on while
red light gives 3 flashes and is off, IR LED is on, now we may press ON/OFF once, night vision is on and
video starts.
IR LED off: In standby mode and video is stopped, turn off IR LED; long-press MODE for 4 seconds,
blue light is on while red light give 4 flashes and is off, this means IR LED is turned off. Turn the device off,
remove the batteries, and all are restored to default state.
Format T card:
In starting up and blue light standby mode, press ON/OFF 2 times, red and blue lights both flash for a
few seconds then stop, this means TF card is formatted, and all data in TF card are cleared.
Reset:
If the device crashes, no button works, please remove and reposition the batteries.
Turn off:
Long-press for 6 seconds to turn off the device (both red and blue lights are off).
Time watermark:
Write in video time watermark, insert TF card and record video, a TXT file named “time.txt” will be
created automatically under the root directory of TF card; Click to open the file, the time watermark format
will appear as follows 2018/08/08 00:00:00 N (yyyy/mm/dd hh:mm:ss) N means no time watermark, Y
means showing time watermark: After setting the yyyy/mm/dd hh:mm:ss, change N to Y.
Reference patterns:
2018/08/08 00:00:00 Y (The suffix Y means the video shows time watermark)
2018/08/08 00:00:00 N (The suffix N means the video shows no time watermark)
PRECAUTIONS:
Usage occasion:
Please strictly abide by the applicable laws of the country; not use this product for any illegal
purposes; otherwise you will be responsible for the consequences.
Operating temperature:
Please use at natural temperature; do not operate the device at temperatures that human
body cannot adapt to.
Operating humidity:
Please use the product in the humidity suitable for living of human beings. Do not put the product
in a damp working environment. The product is not waterproof. Please avoid exposing it to rain.
Shooting illumination:
Please use it in an environment with sufficient light source. Do not point the camera directly at
a strong light source such as the sun to avoid damage to the optical device.
Requirements on cleanliness:
Do not use it in an environment with excessive dust, so as to prevent the lens and
other components from being contaminated with dust and affecting the effect.
Disposal considerations:
Please protect our environment; do not discard this product at will. To avoid danger, it is
forbidden to throw this product into the fire.
1. ON/OFF 2. MODE 3. 940/IR night vision light 4. Mic 5. HD camera 6. Strap holder
7. Red and blue LED lights display 8. TF card slot 9. Alkaline battery clip 10. Back cover
Notes:
1: When the battery is low, red and blue lights quick-flash for 5 seconds, file will be automatically
saved, and then the device is powered off.
2: If the device is powered on but there is no card, red and blue lights flash for 3 seconds, and the
then the device is powered off automatically.
3: If there is card and the device is powered on, blue light is on, the device is standby; it is
powered off automatically if no working mode is started in 30 seconds.
4: If left idle for a long time, the device battery can have uA level leakage. It is suggested that
batteries should be taken out to protect the device.
1080P Infrared Night Vision
MINI DV
USER MANUAL
MQ8
Features:
2 AAA/1.5V alkaline batteries, easy to carry and you can
change battery at any time; no need to worry about charging; it
is environmentally friendly and has low failure rate. The video
format is 1920X1080P&1280X720P, supporting max. 64GB TF
card.
●
High quality image HD 1080P DV DC
●
6 high power 940 night vision lights (invisible to the naked eye)
●
Video format: 1920X1080 1280X720P
●
Photo mode: 12M (4032X3024)
●
Support up to 64G T-flash card (If 64G is needed, use this device to format
64G TF card once before use; certain brands do not support 64G due to
incompatibility)
●
2 AAA/1.5V alkaline batteries can ensure continuous shooting for about 150
minutes (2.5 hours)
Video format
AVI
Video coding
M-JPEG
Video resolution
1920X1080P 1280 X720P
Frame rate
30 fps
Player software
operating system or bring the mainstream video player software
Picture format
JPG
Imaging scale
4:3
Support system
Windows me/2000/xp/2003/vista; Mac os; Linux
Working time
About 150 minutes (about 2.5 hours)
Storage support
TF card
Battery type
AAA/1.5V alkaline battery
Related parameters:
Item Relevant parameter
