Sunshine Me 163 M 1:3,5, Инструкция по сборке, Страница: 3 / 30

Now you have to cut away at the top and bottom of the Flettner flap section in
order to make the Flettner Flaps fit. Draw a line 5mm deep from end to end of the
flap section, see photo 9 for reference. Now cut off as shown in photo 7.
Image 6 Image 7
Image 8 Image 9
Next up are the ailerons. Open up a square notch as shown in photo 11 in order to house
the outer hinge bracket for the ailerons. Use the ailerons as a template to locate the exact
position of the bracket. Everything done right you will find a pre-installed box inside the
wing that will house the hinge bracket. Slightly undersize the hole at first and then slowly
widen it in order to guarantee a tight fit of the hinge bracket inside the box.
Image 11