08/2017 Rev.II
8F, No. 69-10, Sec. 2, Chung Cheng East Road,
Tamsui Dist., New Taipei City, Taiwan
T
+886-2-2809-5156
F
+886-2-2809-1548
E
Sun-Shine Land International Ltd.
User Instruction for HA-4193 (Food Workstation)
Please read and retain this instruction, it provides essential information for correct and safe use.
This instruction is guideline only.
INTRODUCTION
The food workstation is designed to give additional independence, convenience and assistance with
day-to-day kitchen tasks. It is ideal for those who have difficulty in gripping, or only have the use of
one hand. It offers a grating and slicing facility as well as clamping and holding features. It is
equipped with four sucker feet and four rubber non-slip pads that firmly anchor it in place for
additional security on smooth surfaces.
SPECIFICATION
Board Size
Overall Height
Weight
Material
500 x 300 x 35 mm
145 mm
1.7 kg
ABS(body) / PVC(suction cap) /
Stainless(grater, spikes) / Nylon(brush) /
Rubber(non-slip particles)
INSTRUCTIONS FOR USE
1.
A Removable Grater & Slicing Station: Collect the food with a minimum of mess and waste. It has
a removable and protective lid to cover the sharp cutting edges when they are not in use. The lid is
simply lifted off when required.
2.
A Removable Suction Brush Station: Allows one handed cleaning nails, fruit, vegetables, etc.
3.
A Removable Vice Clamp Station: It can open up to wide and hold almost any object in place. It
has one fixed jaw and one moving jaw. Place the object to be held against the fixed jaw. Slide the
moving jaw up to the object. Please note that the moving jaw can only be moved with the handle
in the upper position. When the moving jaw is touching the object, push down on the handle to
lock it. To remove the item, lift the handle up and slide the moving jaw away.
4.
A Raised L Shaped Corner Station: It can be used to hold bread and toast in place whist it is being
spread.
5.
Removable Stainless Steel Spikes Block Station: It keeps bread, fruit or vegetables still when
being sliced, chopped or peeled. It is reversible so that it can safely be stored upside down when
not in use. To use the spikes block, lift up the block from under the end of the board and remove,
reverse the block, return to the slot in the board and push into place.