2 THE BUTTON SET:
MENU SAVE Entering settings and saving values
ESC NEXT Exit settings, step to next setting
UP Adjusts the parameters increase view input and output data.
DOWN Adjust the parameters decrease view input and output data
Note The external LCD displays the same
CH2
CH1
AGM
Priority
CH3
●
Press ‘MENU/SAVE’ button for 5 seconds to enter the settings menu (see Figure 1).
‘2’ displays the setting level and the value to be changed will flash. “UP” &
“DOWN” buttons will change the setting, ESC/NEXT button will step to the next
menu level. “MENU/SAVE” button will save the setting.
●
Press the ESC/NEXT’ button for 5 seconds to exit the menu. Leaving more than 10
seconds without adjustment will also exit the menu.
●
When these is no fault the displays backlight will switch off automatically after 30
seconds, when there is a fault or a button is pressed the display lights.
●
While charging press the “UP” or “DOWN” buttons to view input and output values
PV or DC input voltage, Charge state, charge current, charge voltage.
●
Press ‘UP’ and ‘DOWN’ buttons together for 5 seconds, the display will flash three times
and the unit will be reset to factory settings.
(2)
(1)
(3)
(4)
(5)
(6)
(7)
Figure 1
01
0
12.4
