To Use
Position shin of injured leg on the center of the knee
platform, with knee placed toward the steering tiller.
Foot should point toward the ground.
Stand up straight using standing leg. If needed, adjust knee
pad or handlebar height. Take small steps with standing leg
when first acclimating to scooter.
Activate the parking lock by squeezing in either of the
handbrake levers while pressing and holding down the
respective spring-loaded pin. Release brake lever. Pin should
remain in place. To release the parking lock, squeeze the
brake lever until pin pops back up, and release brake lever.
Adjusting your Scooter
Brakes
To tighten the brake, turn the cable adjustment knob
counterclockwise. To loosen the brake, turn it clockwise.
For additional adjustment, use an allen wrench to adjust the
screw next to the brake lock. To tighten, turn clockwise, to
loosen, turn counter clockwise.
Handles
Adjust handle height with the Height Adjustment Knob. Turn
counterclockwise to remove. Raise or lower the handle to
desired height and replace adjustment knob, tightening until
snug.
Knee Platform
Loosen the Platform Lever and Lock. At the base of the Knee
Platform pole, remove the Safety Ring from untethered side
of pin, and remove pin from post hole. Raise or lower knee
platform to desired height, then replace pin and reattach the
Safety Ring. Retighten the Lever and Lock to secure platform.
Tiller Lever and Lock
To fold the unit for travel or storage, loosen the Tiller Lever
and pivot the lever pin assembly out of the tiller base plate.
Let the lever drop down. Next, fold the tiller down onto the
Knee Platform.
