Sunroad SR204, Руководство пользователя, Страница: 4 / 14

1. Start
Installing the Battery
Rotate the back cover counter clockwise, gripping the unit with both hands,
using your index fingers and thumbs. Rotate until it stops, then gently pry off the
back cover with your fingers, exposing the battery compartment.
Note: you may have to squeeze on the outer ring (not the display) and apply
force in the clockwise and counterclockwise direction repeatedly (work back and
forth) to free the back cover after extended use, due to sweat and other debris.
Make sure your fingers are dry.
Insert the CR2032 battery (+ side up), and close the back
cover, insuring the gasket is firmly seated in the housing
trace, as shown in Figure 1.
To remove the battery, use a small pen or paperclip to
pry the battery out of the battery compartment.
To close the back cover, rotate the back cover clockwise
until the back cover is completely closed. The display
should be powered up in the time and date mode,
and ready for use.
3
Figure 1