Sunrise MORTAR GUN 3000, Руководство оператора

Страница: 9 / 16

Cam-Guard Installing
Kitty-Corner Cam-Guard (#709) into position
between aluminum drill supports.
Snap right and left sides of the
Cam-Guard on to plastic tongue
as shown
Quikpoint Drill-Mate fully assembled
with Drill and Chuck and Cam-Guard.
Quikpoint Drill-Mate fully assembled
with cam-Guard and Drill without Chuck.
Notice Aluminum bars are extended
back by mounting with two bolts
as shown
7.
Push Auger Barrel in
after arms are installed
On our new Quikpoint Model
#3600 (with drill) and #3000 (drill-mate)
to install the Drill-Arms push 1/4 X 3/4 inch bolts
through holes from the inside then tighten
lock nuts as shown.